EMULE PORTY HOW TO
EMULE PORTY MANUAL

Then put the check mark next to the item Use UPnP to set ports in the section Options> Connection of eMule and activates the use of technology UPnP in your router panel to make sure everything is working fine. If not, you may also need to enable UPnP (a protocol that allows different devices to connect to each other by creating a peer-to-peer network) to make eMule work with your router. At the end of the procedure, restart eMule, try to connect to the eD2K network or to the Kad one and the program should work correctly. Once the rule has been created, save it by clicking on the appropriate button on the router management panel and create the rule for the other port of eMule.

Name (or description) - the name to be assigned to the rule created (eg 'eMule TCP' or 'eMule UDP').

EMULE PORTY HOW TO

If you don't know which one it is, read my tutorial on how to find out your computer's IP address. Destination IP (or Server IP Address) - the local IP address of the computer on which eMule is present.Protocol or Port Type - the type of port you are configuring, then TCP or UDP.External (or final) door - the number of one of the two eMule doors (the same value entered in the field relating to the internal door).

Inner (or leading) port - the number of one of the two doors of eMule.

At this point, fill out the form that is proposed to you as follows. To do this, you need to locate the section Port forwarding, Port forwarding, Configure LAN or Virtual Server (the words change from router to router) and click on the button for create a new rule or new virtual server. Now that you have access to the router control panel, you need to open the eMule ports.

EMULE PORTY MANUAL

If, on the other hand, you do not remember the password to access the panel, check the manual of the device or my tutorial on how to enter the router. The address of your router is the one described next to the wording Default gateway. To find out which one, start the Command Prompt from the menu HomeWindows (the flag icon located in the lower left corner of the screen) and give the command ipconfig / all. If neither of the two numeric addresses listed above provides access to the router's internal panel, your router is obviously configured to be accessible from another address. If you are asked to enter login details and you don't know them, try admin / admin o admin / password and you should be in no time at all in front of your router's configuration panel. Now, to open the eMule ports in your router's firewall, you need to access the control panel of the latter by starting Chrome (or any other browser) and connecting to the address 192.168.1.1 or 192.168.0.1. 28823 e 5643) to avoid any restrictions on P2P traffic applied by the Internet provider. If the port numbers currently used by your eMule are equal to 4662 e 4672, I advise you to modify them with higher values (eg. Then go back to the eMule settings menu and write down the values you find in the fields TCP e UDP: these are the ports used by the program to receive incoming connections and communicate with the outside world.

Once the source of the problem is ascertained, you can move on to its resolution. If, as probable, the result is negative, a message like Il will appear TCP port test failed! The UDP port test will not be performed. In the window that opens, select the item Connection from the left sidebar and click on the button Head doors.Īt this point, a browser page will open in which eMule will test the ports. To find out if the doors of eMule are accessible without obstacles by the program, start the program and click on the button options located at the top right. In most cases, this is an incorrect port configuration that the program uses to connect to the Internet in the router's firewall. Before getting into the tutorial and seeing, together, how to configure eMule, we need to understand what is causing your problem.

Emule porty